2AZ-FE or 20v 4age?

I suppose the newer engine would be better for the low end torque the 50% more displacement gives you...

which means less revving up to get you up to speed

what are you shooting for?
high revving madness or a cruiser?

Do the 2AZFE Camry motor.

a black top would be simpler swap for your 7th gen

2AZ-FE would be a poor choice if you looking for an engine that makes some higher RPM power. Though their widespread availability could potentially make them more attractive in the future. From lower RPMs, that additional torque would be immediately felt, plus it has shown to have decent power potential (big pool of quickly developing aftermarket for this engine).

The 7th gen is pretty lightweight, that Blacktop should have more than enough power to move you from lower revs and still give you some flexibility on the higher RPMs. 4AGE has a larger following and strong aftermarket support - though finding clean examples and spare parts availability would be a concern in my mind over the next several years.

blacktop or 3sge..

rebuild the blacktop but make the compression 11:5 for higher rpm

build the 2azfe up by putting higher compression pistons in, as the original one are abot 8:5:1 i think ok for boost but might be weak,

I'd love to swap the ecu from my 1zz-fe and calibrate to 92fuel

Lets do it together

Cuter than a 1zz