I thought the capacitors were to prevent power drains when the bass hits, like when your lights dim momentarily?
Not my area of expertise, but you will need an A245E auto trany from a 98-02 Corolla. Get the 4 speed (with overdrive) from an LE or CE model...
So what setting did you use on the rear bar, was it the most outer holes on the bar ends or the inner ones, or middle?
I believe your ride and Celica GT have the same engine, a 1ZZ-FE. Not sure if the black plastic mani's are that different between the 2 models, maybe...
Need photos...
See this link, the Cool Blue product: http://www.sylvania.com/ConsumerPro...son/default.htm You can click and enlarge the small photos...
You can get a steering column switch from S model in the junk yard or the dealer, sometimes eBay also; they tend to be costly, about $40-$70 on eBay...
Any replacement bumpers' material that bends like our stock (polyurethane or PVC?) ones is good, I'll take that over older fiberglass kits that...
Try posting in the CLASSIFIELD SECTION - For sale/Trade
That's something new to me, probably due to lower emission standards; have to see if my 02 Sienna has them.
You can install one by using one of the transition oil lines that goes inside your radiator (on the side). You should give it some thought as to how...
<a href="http://vamp.darkravers.net/TipsGreddyeManage.cfm" target="_blank">http://vamp.darkravers.net/TipsGreddyeManage.cfm</a><br /> <br /> and<br...
If you have the 98, you can’t use the engine cover from a VVT-? (2000+) engine, the coils are sitting on spark plugs directly and screw into the...
Most likely the Celica TB has a slightly larger inlet diameter than Corollas; the HP gains are probably marginal.
You probably have a catalytic converter followed by a resonator.
Check the back pages of your car manual; it will specify that info. When you drain trany fluid, you always have some additional fluid left behind...
I got a used set and from what I can tell, the grease fittings or nipples would probably rub on the front bar and wear down/break off; also the very...
Found a link for 98-01 install (PDF): http://www.hotchkistuning.com/bin/i...s/22421done.pdf
Use a multi-meter on a ‘continuity’ setting to find the lines that are broken.
I've seen some use the small round or small oval ones to fit in the lower bumper openings.
独立した項目と、
