***'93 amp. installation

***'93 amp. installation

Kindly tell me where do I let the amp. cables run from trunk to h.u then to battery. Hoping to hear from yo'll soon.
Thanx.

Wire it going on the driver side under the door sils all the way to the the area where the wires for the door comes out to if you don't want to drill through your firewall. When you open up the driver side kickpanels there you should see the fuses and wires and stuff. on the left side of the fuse box is like a foam thing. behind that is a hole for wires that goes to the door for power locks and windows. just try to move the foam and on the outside part there is like a rubber gromit. Stick a screw driver to pry it out and then put your cable wires through it. If your power wire is long, then once you get it through that hole, have it go through the fender and make it come out where your corner light is at. Make it fit through the little gaps in the corner light area and hook it up to the battery. This way may be a bit more effort to do, but you don't have to drill through the firewall. If you don't care about drilling, then go through the firewall. Hope this helps.

oh I forgot, from the trunk, remove the bottom part of the rear seat. put the wire under it leading to the plastic door sills. take out the front and rear door sill. THeir easy to take out just pull and pop them out. The front you need to take out like one bolt near the foot rest. also take out the middle plastic piece at the bottom of the driver side seat belt. I think you take that out before removing the front door sills.

Fast, if it's not too much can you pls. show pic from the trunk?
I'll go to the firewall I don't like drilling.
Thanx a million for the info I surely appreciate it.

will do when I find time to take a picture. btw does your rear seats fold down.
if so you can put your amp on it then have the wire going down then under the seats etc.

Yes my rear seats folds down 60-40. Be waiting for those pix.
Thanx again, Fast.