M3 Side Mirrors

M3 Side Mirrors

Okay have my side mirrors in, but the sets of wires don't seem to make up to what i have seen on the forum so far. This is what I bought http://cgi.ebay.com/ebaymotors/ws/e...&item=7909970187&rd=1&sspagename=STRK:MEWN:IT there are two sets of wires, one is in a black plastic sheath like the original mirrors (the wires are black, red, white), the other ones are white, black , blue. What wires match up to what for the power mirrors and what ones for the light? Thanks.

if you can post some pictures of the wireing and i will help you out. i think mine came with a plug attached to the end of 3 of the wires and i think i just cut it off

http://www.imagestation.com/album/?id=4286117715

ok i believe that the black white and red one is for the power and the others are for the blinker but i am not totally sure on that because the wiring for those is differnet from mine but i believe that the mirror should of come with a little peice of paper showing which one was for power and which was for the blinker. i think that mine had 3 wires for the blinker but i ened up not using the last wire.

Do you know where I can get the connector/plug to put the wires into? I tried the local pep boys, but they didn't have it.

i just cut the connectors off when i did mine and used a crimp splice thing that i found at the hardware store

Well I was planing on selling the originals, so I will need to keep the connectors on them which is why I want to know where the connectors are.

i was talking about the connectors on the m3 mirror the little pieces of metal that you can use as conectors. as for the one that the sotck mirror plugs into i cut that one off, not the one that is on the mirror but the one that connects the mirror to the car

So you cut off the plug that is on the door? I want to keep that one, and just take the metal connector ends off and put them into a plug. That is what I am looking for, the plastic plug. Do you have pictures anyway of how you connected them?